WR 500

Micromolecular waterproofing impregnant for porous mortars and other materials.

WR 500 is a solvent based product, it has been studied to penetrate the substrate where it is applied creating a water repellent surface without closing the pores, while allowing the surface to breathe. It leaves the appearance and texture of the surface unchanged, as it does not create a film while at the same time waterproofing.

Available: 1lt | 5lt | 18lt

7-10 m2/lt

1-2

7-8 hrs

Type: Transparent Micromolecular waterproofing impregnant solvent based.
Application method: Brush, roller.
Dilute: Ready to use.
Spreading Rate: 7-10 m²/l on properly prepared surfaces.
Drying times: Touch dry after 7-8 hours. It can be recoated after 6 hours. Drying times depends on weather conditions (humidity - temperature).
Shades: Transparent.
Storage: It is recommended to store between 5^OC - 35^OC.

The surface to be painted should be thoroughly cleaned so that it is dry, smooth, free of dust, oil, grease, rust, mold residues, salts and residues of old peeling paint. Ensure good ventilation during application and drying of the material. Apply with a brush or brush so that the material penetrates better into the pore of the surface where we apply it. Adverse weather conditions during application, such as low temperature – high humidity, affect the properties of the material.