Type: Elastomeric insulating sealing paint.
Application: Roller, brush or spray gun.
Dilution: 10-15% with clean water for first layer and 5% for second layer.
Spreading Rate: 13-14 m2 / L per coat on properly prepared surfaces.
Drying: Touch dry after 3 hours. Recoatable after 8 hours. Drying times depends on the weather conditions (humidity – temperature).|
Shades: It is available in white. It is also colored through the MAXI COLOR coloring system. Storage: It is recommended to store between 5°C – 35°C.
VOC (Volatile Organic Compounds): EU maximum VOC content limit values (Directive 2004/42/CE) for this product (category A/c “Exterior walls of mineral substrate”, Type WB):40 g/l. This product contains maximum 37 g/l VOCs (ready for use).
Surfaces must be cleaned, dry and smooth, free from dust, oil, grease, rust, mould residues, salts and from loose or flaking paint. It is also recommended to smooth the surface with the proper sand paper and clean it well from dust. New surfaces or surfaces previously covered with low quality paints should be primed with MAXIDUR (solvent-based primer or water-based primer) and then painted with two coats of MAXIWALL. For plasterboard or plaster surfaces prime with water acrylic primer MAXICOVER and then apply two coats of MAXIWALL. Adverse weather (low temperature - high humidity) during the application may influence the attributes of the material.
Μακριά από παιδιά. Αποφεύγετε την επαφή με το δέρμα και τα μάτια. Σε περίπτωση επαφής με το δέρμα πλύνετε με άφθονο νερό και σαπούνι. Μη χρησιμοποιείτε διαλυτικά. Σε περίπτωση επαφής με τα μάτια πλύνετέ τα αμέσως με άφθονο νερό και εάν υπάρχει ανάγκη ζητήστε ιατρική συμβουλή. Σε περίπτωση κατάποσης ζητήστε αμέσως ιατρική συμβουλή. Να μην χρησιμοποιούνται τα άδεια δοχεία για αποθήκευση τροφίμων. Χρησιμοποιείτε απαραιτήτως κατάλληλα μέσα ατομικής προστασίας.