Type: Professional emulsion paint for interior use.
Application: Roller, brush or spray gun.
Dilution: 10-15% with clean water.
Spreading Rate: 8 m2 / L per coat on properly prepared surfaces.
Drying: Touch dry after 1 hour. It can be recoated after 3 hours. Drying times depends on weather conditions (humidity - temperature).
Shades: It is available in white.
Storage: It is recommended to store between 5°C – 35°C.
VOC (Volatile Organic Compounds): EU maximum VOC content limit vales (Directive 2004/42/CE) for this product (category A/a "Interior matt walls and ceilings" (Gloss <25@60o)", Type WB): 30 g/l (2010). This product contains maximum 3 g/l (ready for use product).
Surfaces should be clean, dry and smooth, free from dust, grease, salts, loose or flaking paint. For new surfaces or porous surfaces coated with lime or low quality paints, prime with MAXIDUR water based primer and then apply two coats of MAXIFLAT. For surfaces made of plaster board or plaster should first be primed with MAXICOVER (Acrylic water based primer) and then apply two coats of MAXIFLAT. Ensure good ventilation during application and drying.
Keep out of reach of children. Wear protective gloves, clothing, eye protection. IF IN CONTACT WITH EYES: Wash immediately with plenty of water, opening the eyelids fully. Remove contact lenses, if possible, and keep washing. Get medical advice/attention. IF ON SKIN: Remove contaminated clothing. Rinse skin with a shower immediately. Get medical advice/attention. IF SWALLOWED: Call a POISON CENTER of doctor. Do not induce vomiting unless explicitly authorized by a doctor. Do not use empty containers for food storage.